thermostat with Oled display

[kotogi]

Great. Thank you very much. You are wonderful. Everything works correctly. You are my guru. I also use Termopar ESP8266 y MAX6675 .

[kotogi]

elmaya
In many applications, there is no need to increase the temperature by 0.5 degrees (smokehouses, stoves, saunas, etc.). Can you modify the program in such a way that the setting can be changed by 1 step or even by two with one click?
Thus, the display shows the set temperature without tenths of a degree.
Thanks whether it works or not.
greetings

[elmaya]

elmaya
In many applications, there is no need to increase the temperature by 0.5 degrees (smokehouses, stoves, saunas, etc.). Can you modify the program in such a way that the setting can be changed by 1 step or even by two with one click?
Thus, the display shows the set temperature without tenths of a degree.
Thanks whether it works or not.
greetings

the code is getting a bit old.
I am considering updating the code to the current Supla library.
but I have to find time to do it.

I am considering adding the possibility of defining the steps of +/- thermostat temperature to WiFiConfig, from "0.1ºc" to "10ºc"

Great. Thank you very much. You are wonderful. Everything works correctly. You are my guru. I also use Termopar ESP8266 y MAX6675 .

MAX6675 and MAX31655 probably only in the version without Oled due to lack of Gpio to connect.

[kotogi]

Great. Thank you very much. You are wonderful. Everything works correctly. You are my guru. I also use Termopar ESP8266 y MAX6675 .

I wanted to write that I use your software from the Termopar ESP8266 y MAX6675 https://es-forum.supla.org/viewtopic.php?f=70&t=5950

"I am considering adding the possibility of defining the steps of +/- thermostat temperature to WiFiConfig, from "0.1ºc" to "10ºc""
SUPER

[klew]

@elmaya, please consider that support for "thermostat" channel type should be introduced within few months (hopefully). So personally I'd rather hold with rewriting thermostat applications before that.

[elmaya]

@elmaya, please consider that support for "thermostat" channel type should be introduced within few months (hopefully). So personally I'd rather hold with rewriting thermostat applications before that.

I am aware that someday there will be a thermostat channel.
but there will be at least a thermocoupler version "probably without Oled" as a workaround to avoid having to use Supla scripts as a thermostat.

[klew]

I am aware that someday there will be a thermostat channel.
but there will be at least a thermocoupler version "probably without Oled" as a workaround to avoid having to use Supla scripts as a thermostat.

I expect that someday will happen within few months.

[elmaya]

the "someday" was meant to be a joke.

[klew]

the "someday" was meant to be a joke.

Thou shall never joke about deadlines/roadmaps in Supla

[elmaya]

the "someday" was meant to be a joke.

Thou shall never joke about deadlines/roadmaps in Supla

I hope you can forgive me someday